"DFU mode is not the same as restore mode"
DFU (Device Firmware Upgrade) mode is not the same as restore mode. DFU mode bypasses the current OS installed and allows you to upgrade or downgrade your OS. If you are getting errors trying to restore in iTunes, DFU mode is very likely for you.
This is how to achieve DFU mode. You can do it on every phone:
* Attach the phone to the PC
* Turn the phone off
* Hold power and home together for *exactly* 10 seconds
* Release power but keep holding home until the PC beeps as a USB device is recognized.
* At no point will the display come on. Now your restore should work.
NOTE : It may take a few attempts to get your iPhone into DFU mode. Generally, I hold down both buttons then release the Home button just before I think the Apple logo would appear. If you are still holding both buttons down and you see the Apple logo you are holding them down for too long!
Alternative Method:
Step 1. Connect iphone to USB then listen to the sound when it connect and disconnect.
Step 2. Hold the home and power buttons until hear the disconnect sound then release power button.
Step 3. Wait until you hear another sound then release home button.
Alternate Method: Going Into DFU Mode Without Button Pushing: (on windows) Easier than timing the buttons just right!
1.) First download the required archive...
2.) Extract the archive to the root of your hard drive, should be C:/DFU/
3.) Connect your iPhone and ignore iTunes
4.) Goto Start - run
5.) Next type in “c:/dfu/dfu iBSS.m68ap.RELEASE.dfu”
6.) Wait for iPhone to show a “white” screen
7.) Now you may proceed to downgrade!
DFU (Device Firmware Upgrade) mode is not the same as restore mode. DFU mode bypasses the current OS installed and allows you to upgrade or downgrade your OS. If you are getting errors trying to restore in iTunes, DFU mode is very likely for you.
This is how to achieve DFU mode. You can do it on every phone:
* Attach the phone to the PC
* Turn the phone off
* Hold power and home together for *exactly* 10 seconds
* Release power but keep holding home until the PC beeps as a USB device is recognized.
* At no point will the display come on. Now your restore should work.
NOTE : It may take a few attempts to get your iPhone into DFU mode. Generally, I hold down both buttons then release the Home button just before I think the Apple logo would appear. If you are still holding both buttons down and you see the Apple logo you are holding them down for too long!
Alternative Method:
Step 1. Connect iphone to USB then listen to the sound when it connect and disconnect.
Step 2. Hold the home and power buttons until hear the disconnect sound then release power button.
Step 3. Wait until you hear another sound then release home button.
Alternate Method: Going Into DFU Mode Without Button Pushing: (on windows) Easier than timing the buttons just right!
1.) First download the required archive...
2.) Extract the archive to the root of your hard drive, should be C:/DFU/
3.) Connect your iPhone and ignore iTunes
4.) Goto Start - run
5.) Next type in “c:/dfu/dfu iBSS.m68ap.RELEASE.dfu”
6.) Wait for iPhone to show a “white” screen
7.) Now you may proceed to downgrade!
Thu 26 Jul 2012, 10:48 am by paulian
» unlockgsm RULES
Tue 28 Jun 2011, 4:04 pm by D'MasteR™
» SL3 Unlocking & Dead boot Services by: NuNuY
Wed 18 May 2011, 8:18 pm by UnlockGsm
» Mobile Chat Avacs
Sun 03 Apr 2011, 8:58 pm by not
» musta na mga kabaro
Mon 21 Mar 2011, 1:31 pm by hymtone
» newbie po...
Mon 21 Mar 2011, 1:26 pm by hymtone
» SE R300 phone lock! Done by SEtool
Sun 13 Mar 2011, 11:38 am by tekamots
» Arieth Mu Online
Sat 19 Feb 2011, 1:16 am by MartinX-ariethAD
» SE w350a AT&T lock. unlock by setool smoothly
Tue 15 Feb 2011, 1:21 pm by tekamots